Shipping Notice

Orders placed between 5/1 and 5/10 won’t ship until 5/11 at the earliest. I am away from the shop and will get your items out in the order they were received.

-Fits 22” or 26” Weber Kettle Grills (Specify Size before adding to Cart) (*Does Not Fit 22” Jumbo Joe size kettle)

-Choose if you’d prefer edges folded UP or DOWN. (See Pictures) Edges UP help keep items safely contained on your table. Edges DOWN give you a little more freedom for over-hanging large platters or items.

-Both 22” and 26” Side Tables measure 14.25” wide x 13” long

-Raised edges are 3/4” tall

-Supports up to 15 lbs (Exceeding this increases chance of tipping grill)

-Made of 304 Stainless Steel

-Handmade in the USA

-Cosmetic scratches may exist on surface of metal.

-Easy installation and removal

-Does not affect how the lid fits on the kettle

-Fits under lid for convenient storage

The Heat Beacon Side Pocket is a convenient way to hold all of your grill utensils while you grill. Easily hangs over the side of your charcoal grill kettle and allows easy access to your tongs, spatulas, brushes, or scrapers.

-Single Pocket measures 9”x 6”x 4”

-Fits all Weber grill sizes 18”, 22”, and 26” (Select grill size in the drop down menu before adding to cart…this helps us know the thickness of the kettle rim on your grill)

-Fits the Recteq B-380 Bullseye Pellet Grill (Select 22” kettle size in the drop-down menu)

-Handmade in the USA

-Cosmetic scratches may exist on surface of metal

-304 Stainless Steel construction

Shipping Notice

Orders placed between 5/1 and 5/10 won’t ship until 5/11 at the earliest. I am away from the shop and will get your items out in the order they were received.

This Griddle plate is made out of heavy duty 11-gauge cold rolled mild steel. At 21.5 inches diameter, it is designed to fit into 22” Weber Kettle Charcoal Grills.

-Use the flat griddle part to smash burgers, fry eggs, toast buns, sauté onions, cook pancakes, and many more things.

-Use the sear portion of the grill to get high temp grill marks on your steak or burgers.

-It is recommended to season the griddle prior to use, and to maintain it properly, to prevent rust and corrosion.

• Clean product with hot and soapy water to remove manufacturing debris

• Heat oven or grill to 300-400 degrees.

• Apply a thin coat of cooking oil (like Canola oil) all over the entire product, making sure to not have any excess oil on the plate. I like to use paper towels for both applying and removing oil. (Place foil or a baking sheet on the rack below the griddle to catch any drips of oil that may occur)

• Heat the griddle in the oven or grill for 1 hour. Apply additional thin coats of oil if desired.

• Let griddle cool slowly and naturally over time until cool. Wipe off any excess oil that may exist.

• Store in a safe and dry location to prevent rust.

-After cooking, it is recommended to remove excess debris by wiping with a non-abrasive pad or cloth. Do not use soap and water, as this will remove the seasoning layer. If desired, apply another thin coat of cooking oil prior to storage.

(Metal plate may contain small cosmetic scratches or imperfections but won’t affect the performance of the griddle.)

Shipping Notice

Orders placed between 5/1 and 5/10 won’t ship until 5/11 at the earliest. I am away from the shop and will get your items out in the order they were received.

Stainless Steel options are OUT OF STOCK indefinitely until I can source SS in the appropriate thickness that doesn’t lead me to raising prices excessively.

This deflector plate and charcoal ring kit is designed for the kettle enthusiast who wants to cook low and slow while utilizing the entire grill grate surface. Heat generated from the coals in the lower ring will deflect to the outside of the kettle, providing an indirect heat throughout the kettle.

-No modifications to your existing grill required.

-Does Not Fit 22” Jumbo Joe Kettles or any Smokey Joe models.

-Deflector Plate (Mild Steel Option): Made out of Cold Rolled Mild Steel. (Mild Steel will rust without proper care. It is recommended that the steel be seasoned with a cooking oil while the plate is hot. Simply using the product while cooking meat will also help season it from fat drippings. Store in a dry location.) Other instructions will be provided with your order.

-For 18” Kettle: Not Available in Mild Steel

-For 22” Kettle: Deflector Plate is 19” Diameter ($75.99) **Made out of 3mm Steel

-For 26” Kettle: Deflector Plate is 23” Diameter ($79.99) **Made out of 2mm Steel

-Deflector Plate (Stainless Steel Option): Made out of 304 Stainless Steel. Stainless Steel will resist rust and last longer and is generally lower maintenance.

-For 18” Kettle: Deflector Plate is 15” Diameter ($79.99) **Made out of 2mm SS

-For 22” Kettle: Deflector Plate is 19” Diameter ($104.99) **Made out of 2.5mm SS

-For 26” Kettle: Deflector Plate is 23” Diameter ($124.99) **Made out of 2.5 mm SS

-Charcoal Ring: Made out of 304 Stainless Steel at .039” thick.

-For 18” Kettle: Charcoal ring is 11.5” diameter (3” tall)

-For 22” Kettle: Charcoal ring is 13.5” diameter (3.25” tall)

-For 26” Kettle: Charcoal ring is 15.5” diameter (3.25” tall)

-Deflector Plate rests on top of Charcoal Ring’s upper tabs. A small 1/4” gap exists between the two so that heat and air can flow freely to the outside of the kettle.

-1” gap around the perimeter between kettle wall and deflector plate edge.

-Distance between plate and grill grate is 1.5” (can accommodate water pan up to 1.5” tall)

-Charcoal Ring for 22” Kettle holds up to about 100-125 Kingsford briquettes (85-105 for 18” kettle, or 120-140 for 26” Kettle) just dumping the bag into the ring. Might hold more if individually organized by hand.

Directions for use: Place charcoal ring on lower charcoal grate. Fill ring with desired amount of charcoal (holds roughly 100+ briquettes). Add wood as desired for smoke. Light the coals in the middle of your pile with your fire starter of choice. Once middle coals are gray and established, cover the ring with the deflector plate. Add a shallow tray of water on top of plate if desired. Regulate temperature with vents to achieve desired temperature.

-My tests have shown that I can hold about 250 degrees F for 8 hours with a full ring of charcoal.

Shipping Notice

Orders placed between 5/1 and 5/10 won’t ship until 5/11 at the earliest. I am away from the shop and will get your items out in the order they were received.

-Select which model of Weber grill you own below, THERE IS A DIFFERENCE IN SIZE

-22” MASTER-TOUCH ($54.99): 20.5” BETWEEN THE WHEELS (does not fit the MT premium model, the one with the hinged lid)

-22” ORIGINAL & ORIGINAL PREMIUM: 19” BETWEEN THE WHEELS

-26” ORIGINAL PREMIUM & MASTER-TOUCH ($59.99)

-18” ORIGINAL: 17” BETWEEN THE WHEELS

-Helps keep things stored underneath your grill without falling off or through the wire shelf.

-Side walls are 1” tall

-Easy install/removal (Overlays on existing wire shelf)

-304 Stainless Steel

-Made in the USA

-Cosmetic scratches may exist on surface of metal

Shipping Notice

Orders placed between 5/1 and 5/10 won’t ship until 5/11 at the earliest. I am away from the shop and will get your items out in the order they were received.

-An adjustable wall that contains charcoal briquettes in a designated area.

-Can be used to hold hot coals on one side of grill for direct cooking above the coals and indirect cooking away from the coals.

-For low and slow cooking: Fill designated area with unlit briquettes, light one end of the coals and control how hot/fast the coals burn with ventilation adjustments.

-It is recommended to only use charcoal briquettes when banking coals against the kettle wall. Here is a statement from a Weber Customer Service Representative regarding the matter, “Banking coals along the side of the kettle is acceptable, but you may want to avoid using lump charcoal in that situation due to its propensity to burn a bit hotter and faster than standard briquettes.“

-Fully adjustable up to half the diameter of your grill.

-Designed to fit the stock Weber charcoal grates for the following:

• 18” Original Kettle

• 22” Original, Original Premium, Master-Touch

• 26” Original Premium

-The wall stands 4.25” vertically off the charcoal grate.

-Made out of 304 Stainless Steel in the USA. Hardware included is 18-8 Stainless Steel.

Shipping Notice

Orders placed between 5/1 and 5/10 won’t ship until 5/11 at the earliest. I am away from the shop and will get your items out in the order they were received.

Rain shield cover for top vent on Weber kettle lids.

-Easily movable to sit in the desired position for optimal rain protection

-All stainless steel

-Fits all Weber Kettle model sizes

-On 22” and 26” models, its best used on handles that include the Weber heat shield.

-On 18” models, it reaches the top vent fine with or without the heat shield on the handle.